Cleaning & Maintenance - Ronco Smart Juicer Instructions Manual

Table of Contents

Advertisement

Cleaning and Maintenance
1. Switch off the machine and disconnect from power source.
2. Turn the food chute counter-clockwise direction to unlock.
3. Twist the bowl counter-clockwise to the unlock position and lift
out the entire section.
4. Disassemble the top assembly in the following order:
a. Food Chute
b. Auger
c. Strainer
d. Rotating Basket
e. Bowl
FOOD CHUTE
5. Using the included cleaning brush, thoroughly clean each of
the disassembled parts using warm, soapy water. Do not use
abrasive cloths or liquids. We recommend that you hand-wash
attachments.
6. Do not rinse the Smart Juicer base.
7. Dry all attachments before reusing. Do not soak attachments for
an extended period of time.
Helpful Tips:
Due to the powerful staining properties of the carotenoids that
are found in many vegetables especially carrots, we suggest the
following cleaning procedures:
1. Biodegradable soap in enough warm water to cover parts.
2. 1 part warm water to 1 part cider vinegar.
3. 1/2 small box baking soda in enough warm water to cover parts.
4. 1/4 cup bleach in sink full of warm water.
5. Never use strong household cleaners, ammonia or abrasives.
6. Bleach helps remove stubborn stains caused by some fruits and
vegetables. Clean parts immediately to avoid using bleach.
10
AUGER
STRAINER
ROTATING BASKET
BOWL

Advertisement

Table of Contents
loading

Table of Contents