Troubleshooting Guide; Key Replacement Parts; Specifications - Simplicity WONDER Owner's Manual

Troubleshooting Guide

Please check each item below if you have trouble with your vacuum.
Unplug the vacuum from the power supply before servicing.
Problem
Suction power is weak.
The vacuum does not work.
Power cord does not retract.
Power cord won't pull out of
the vacuum.

Specifications

Model: WONDER
Rating: 120V/60Hz
Amps: 10

Key Replacement Parts

• Genuine HEPA Media Vacuum Bags 6 pack: SCH-6
Genuine HEPA Media Filter Set: SF19
•
• Mircofiber Pad 3 pack: HFIP-3
Check Point
Vacuum bag
Wand, tools, or hose
Is the hose adapter inserted
into the suction opening of the
vacuum completely?
When the vacuum bag is full
or any of the accessories are
blocked, the over-heating
protection for the motor
is activated.
Power cord
Power cord
8
Possible Solution
If vacuum bag is
full, replace it.
If clogged or blocked,
remove the object.
Insert it completely.
Turn the vacuum off and
unplug the vacuum.
Check the vacuum
bag and accessories
and remove any
blockages. The
vacuum can be turned
on again after approximately
20 minutes.
Tug the power cord a
little until it starts to retract.
Do not pull it out by force.
Visit an Authorized Simplicity
Vacuum Retailer.