Tire Changing - GMC Acadia Owner's Manual

1. Wheel Block
2. Flat Tire
The following information explains
how to repair or change a tire.

Tire Changing

Removing Tools
The tools needed to remove the
spare tire are located in the storage
compartment on the driver side, at
the rear of the vehicle.
1. Tool Bag
2. Wing Bolt
3. Jack
1. Open the jack storage
compartment by pulling on the
latch tab, located toward the rear
of the vehicle, and pulling the
cover off.
2. Remove the wing bolt (2) by
turning it counterclockwise.
3. Push the jack (3) up out of the
holding bracket and remove the
tool bag (1).
Vehicle Care
4. Turn the jack on its side, with the
bottom facing toward you.
5. Pull the jack straight out, bottom
first.
1. Jack
2. Wrench (Three-Piece Shown,
One-Piece Similar)
The tools you will be using include
the jack (1) and wrench (2).
10-59