GMC Acadia Owner's Manual page 199

1. Press / .
2. Say Digit Dial.
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered,
say Dial.
Once connected, the person called
will be heard through the audio
speakers.
Using the Re-dial Command
1. Press / .
2. After the tone, say Re-dial.
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
Press / to answer the call.
Press / to ignore a call.
Call Waiting
Call waiting must be supported on
the cell phone and enabled by the
wireless service carrier.
Press / to answer an
incoming call when another call
is active. The original call is
placed on hold.
Press / again to return to
the original call.
To ignore the incoming call, no
action is required.
Press / to disconnect the
current call and switch to the call
on hold.
Three-Way Calling
Three-way calling must be
supported on the cell phone and
enabled by the wireless service
carrier.
1. While on a call, press
2. Say Three-way call.
Infotainment System
3. Use the dial or call command to
dial the number of the third party
to be called.
4. Once the call is connected,
press
together.
Ending a Call
Press /
Muting a Call
During a call, all sounds from inside
the vehicle can be muted so that the
person on the other end of the call
cannot hear them.
To mute a call, press
then say Mute call.
To cancel mute, press
and then say Un-mute call.
Transferring a Call
Audio can be transferred between
the Bluetooth system and the cell
phone.
/ .
7-25
/ to link all callers
to end a call.
/ , and
/ ,