Using Battery Power - Compaq Presario 1200 series User Manual

Mobile internet pc
Hide thumbs Also See for Presario 1200 series:
Table of Contents

Advertisement

Your Notebook contains a
lithium ion or nickel metal
hydride battery pack. Improper
handling of the battery pack
can result in fire and chemical
burns. Do not disassemble,
crush, puncture, short external
contacts, dispose of in water or
fire, or expose it to
temperatures higher than
140 °F (60 °C). Replace only
with the Compaq battery pack
specified for your Notebook.
"Caring for Your Battery"
later in this guide.
The battery charges whether
your Notebook is on or off. It
continues charging until the
battery is fully charged or the
AC power is disconnected.
If you will not be using your
Notebook for an extended
period of time, Compaq
recommends that you unplug
the electrical cord from the
outlet and remove the
battery while your Notebook
is not in use.
P
N
B
RESARIO
OTEBOOK
EYOND
1200 S
ERIES

Using Battery Power

Inserting the Battery
To insert your battery into the
battery compartment, complete
the following steps:
1. Push down 1 on the
battery compartment door
to remove the door.
2. Insert 2 the new battery into the battery compartment with
the label side turned up.
3. Close the battery compartment door by gently pushing up
on the door until it snaps into place.
Removing the Battery
To remove the battery, complete the following steps:
1. Save your files.
2. If the AC adapter is not connected, turn off your computer.
3. Remove the battery compartment door by sliding it down.
4. Use the tab on the battery to pull the battery out.
Charging the Battery
To charge the battery, insert the battery in
the battery compartment and connect your
Notebook to AC power. Leave your
Notebook plugged into the electrical outlet
until the Battery Charging
longer lit. This ensures that the battery is
fully charged.
S
-
G
ET
UP
UIDE
7
LED is no
U
Y
SING
OUR
N
3-5
OTEBOOK

Advertisement

Table of Contents
loading

Table of Contents