Samsung Galaxy light User Manual page 134

•
S Beam Transfer uses the NFC (near Field Communication)
feature found on your device to transmit large files directly to
another compatible device by direct touch.
This method of image transfer requires NFC and S Beam to be
enabled prior to use.
For more information, refer to "Using S Beam to Share Pictures"
on page 129.
Enabling Share Shot
Share shot is a Wi-Fi Direct group sharing feature where
multiple users can connect their devices by the Wi-Fi Direct
feature and share photos in real-time.
For more information, refer to "Wi-Fi Direct Setup and
Settings" on page 198.
The general process is:
• Enable Wi-Fi Direct communication
• Pair your device with other users
• Enable Share shot
127
To enable Wi-Fi Direct:
Important! The target device must already be connected to the
same Wi-Fi and have its Wi-Fi Direct feature active
and scanning before you can pair.
1. From the main Settings page, tap
2. Tap Wi-Fi to open the Wi-Fi screen.
3. Make sure the Wi-Fi ON/OFF button is turned On.
4. Tap Wi-Fi Direct.
5. Tap Scan and select the single device name to begin
the connection process to another Wi-Fi Direct
compatible device.
– or –
Tap Multi connect
names to begin the connection process to these
Wi-Fi Direct compatible devices.
Note: The target device must also have Wi-Fi Direct service
active and running before it can be detected by your
device.
Connections.
Scan and select all the device