Recording From An External Device - Toshiba D-KVR20KU Owner's Manual

Recording from an External Device

Before recording from an external device, refer to the
instructions for the connection on page 44.
1
Downloaded From Disc-Player.com Toshiba Manuals
E9KGBUD_D-KVR20KU_EN.indd 45 E9KGBUD_D-KVR20KU_EN.indd 45
SETTINGS FOR AN EXTERNAL DEVICE
OPEN/ OPEN/ INPUT INPUT
CLOSE CLOSE SELECT SELECT HDMI
.@/: ABC DEF
TRACKING
GHI JKL MNO
PQRS TUV WXYZ SAT.LINK
TIMER
SPACE
PROG.
SETUP DISPLAY AUDIO
DISC MENU TOP MENU
ENTER
CLEAR RETURN
INSTANT 1.3x/0.8x
TIME SLIP
SKIP PLAY
REV PLAY FWD
SKIP STOP STOP SKIP
PAUSE
VCR VCR DVD DVD
DUBBING REC MODE REC MODE REC REC
REPEAT TIMER SET SEARCH ZOOM
7 5
2 7 5
1
Turn on the TV and press
[I/y y ON/STANDBY], and be sure to
select the input of the TV to which
the unit is connected.
2
When you want to record to the disc:
Press [DVD].
Press [OPEN/CLOSE A] to open the disc
tray. Place the disc to record properly.
Press [OPEN/CLOSE A] again to close
the disc tray.
It takes a while to load
the disc.
When you want to record to a
cassette tape:
Press [VCR].
Insert the cassette tape with an
erase-protection tab into the cassette
compartment.
3
Select the input of the unit which the
external device is connected. (L1, L2
or DV(L3))
• To use the input jacks on the rear of this unit;
Select "L1" by using [INPUT SELECT
• To use the input jacks on the front of this unit;
Select "L2" or "DV" (L3) by using
[INPUT SELECT ].
4
Press [REC MODE] to select a
recording mode.
Refer to "Recording Mode" on page 33 for DVD
or "Recording" on page 99 for VCR.
5
Press [I REC] on the unit to start
recording.
6
Start playback on the external device
to record from.
7
Press [C STOP] / [A EJECT / C STOP]
on the unit to stop recording.
This operation may take
awhile to be completed.
].
EN EN 45 45
2008/05/27 16:10:42 2008/05/27 16:10:42