Table of Contents
Advertisement
Status Messages
On-Screen Messages
SEARCHING
ACQUIRING SIGNAL
OUT OF RANGE
LAMP WARNING - CHANGE
LAMP AND RESET LAMP
TIMER!
OUT OF LAMP USAGE
TIME. CHANGE THE LAMP!
OUT OF LAMP USAGE
TIME. YOU HAVE TO
CHANGE THE LAMP!
Projector is searching for input.
Projector has identified the input signal and is run-
ning the auto image adjustment function.
Input signal frequency exceeds the projector's
range.
The lamp has been in operation for 1400 hours.
Install a new lamp for optimal performance.
The lamp has been in operation for 1480 hours, and
the power will turn off after 20 hours.
The lamp has been in operation for over 1500
hours. The warning message will display for 30 sec-
onds every 5 minutes after you turn on the projector
and the power will turn off automatically after 10
minutes.
DLP Personal Projector
Description
23
Advertisement
Table of Contents
