Table of Contents
Advertisement
When you release the seat cushion, the seatback is
auto~natically released. Pull the loop on the seatback
forward and fold the seatback onto the seat cushion.
While the seat is in the folded position, hang the latch
plate end of the outer passenger position safety belts on the
hooks at the top of each retractor cover, out of the way.
To return the seat to the passenger position, just lift up
on the seatback and push
it
rearward until
it
latches.
After returning the seat to the passenger position. pull
forward on the seatback to make sure
it
is locked in
place. Also, return the safety belts and head restraints to
their original positions, so they will be available for rear
seat passengers to use.
Folding the Rear Se
(4-DOor U --ity Model)
If your vehicle has a 60/40 rear seat, either side may be
folded down to give you more cargo space.
Before folding, place the latch plate portion of the center
safety belt in the center arm rest. That way, the center
safety belt will be out of the way when the seat is folded
and also will be easily available for passengers to use
when the seat is returned to the passenger position.
Also,
make sure that nothing is under or in front of the seat.
When the seat is folded, it will lay flat on the floor.
First, remove the head
restraints. Push the release
buttons at the bottom of
each head restraint height
adjust post and slide the
head restraint out of the
height adjust tubes.
Set the head restraints aside for now. You will stow
them
in
their proper position after you are done folding
the
seat.
1-9
Advertisement
Table of Contents
