Buick LaCrosse 2015 Getting To Know Manual page 12

Hide thumbs Also See for LaCrosse 2015:
Table of Contents

Advertisement

Getting to Know Your LaCrosse
12
MP3-Capable Uplevel Radio
(if equipped)
Play MP3 files on CD-R CDs of up to
700-MB capacity. To play, with the igni-
tion on, insert the disc partway into the
slot, label side up. The player will pull it
in. "READING" appears on the display
and the disc plays. Smaller, 3-inch
(8-cm) single CDs may be used with
an adapter ring.
3
(Repeat): Press to hear a track
over again. RPT is displayed. Press
again to disable repeat play.
5
(Previous Folder): Press to go to
the first track in the previous folder.
Pressing while in the Folder Random
mode takes you to the previous folder
and plays random tracks there.
6
(Next Folder): Press to go to the
first track in the next folder. Pressing
while in Folder Random mode takes you
to the next folder and plays random
tracks there.
Six-Disc CD Player (if equipped)
To load multiple CDs in the six-disc
CD player:
1. Turn the ignition on. Press and hold
the Load button for two seconds. The
player beeps and the light to the right
of the slot will flash. "MULTI LOAD #"
is displayed.
2. When the light stops flashing and
turns green, "INSERT CD #" is
displayed. Insert a disc partway,
label side up.
3. Indicator light will begin blinking and
turn green. Another disc may be
loaded.
4. When loading two to five CDs, press
the Load button again after loading
the final CD.
For every CD loaded, a number appears
on the radio display. To play a specific
disc, press CD and the number of the
CD you want to hear. A small bar
appears under the CD number that is
playing, and the track number appears.
Finding a Category Station
(if equipped)
Category (CAT) stations are available on
XM1 or XM2 bands only. To find a CAT
station:
1. Press the CAT button to activate
Program Type (PTY) Select mode.
2. A category is displayed.
3. Rotate the Tune knob. When the
preferred category appears, press the
Seek button to go to the first category
station (Pressing Seek for more than
two seconds will activate Category
Scan).
4. To go to another station, press the
CAT button. The previously stored
category will be displayed.
5. Press the up or down Seek button.
6. Press the CAT button to exit Program
Type Select mode.
Steering Wheel Controls (if equipped)
See Radio and CD Controls for full details
about the functions of the following buttons:
(Seek)
• BAND
• 1-6 (Preset Stations)
(OnStar
/Mute): Press to silence
®
audio, and again to play. In OnStar-
equipped vehicles, press to interact
with the OnStar system.
(VOLUME): Press up/down
arrow to increase/decrease volume.
See Section 3 of your Owner Manual.

Advertisement

Table of Contents
loading

Table of Contents