Advertisement
7. Move the cursor to UNLOCK and press the ENTER to LOCK the setup menu.
Note: If no button is pressed for 2 minutes while any setting menu displayed, all modified
UNLOCK PASSWORD
Press UP, DOWN, DOWN, RIGHT then ENTER key to unlock the menu.
data will be stored and camera will return to the normal camera picture mode.
6. Setting Procedure
6.1 Camera Identification Setting (CAMERA ID)
Move cursor to CAMERA ID then press ENTER key to enter ID sub menu
Blinking
0 1 2 3 4 5 6 7 8 9 :
A B C D E F G H I J K
L M N O P Q R S T U V
W X Y Z a b c d e f g
h i j k l m n o p q r
s t u v w x y z
□□□□□□□□□□□□
RET POSI ← →
Move cursor to the character you wish to enter or modify by pressing UP, DOWN, RIGHT,
LEFT key. After selecting the character, by press ENTER key, selected character will
display on editing data area.
Repeat the step above until all characters are inputted or edited.
Move cursor to ← → to edit a specific character in editing data area.
Move the cursor to BLANK (between "z" and "
erase the character previously entered.
Move cursor to POSI, then press ENTER, the
ID will be displayed on screen.
Camera ID can be moved to desired position by
pressing UP, DOWN, RIGHT, LEFT key, then press
to fix the ID position and return to previous menu.
●
Applicable for WDS-HDR1527DN & WDS-HDR1520
▲ Only Applicable for WDS-HDR1527DN
CAMERA ID
, .
,
") character position then press enter to
-6 -
Character Area
Editing Data Area
Command area
↑
← CAM 001 →
↓
camera
ENTER
Advertisement
