Advertisement
5.ENTER button-Press this button to display the setting menu, if the selected item has its
own menu; press this button to enter sub menu.
PC control
For window 95/98/ME/2000/XP
1. Insert the floppy into diskette drive
2. Execute OSD_CONT.EXE
3. A keypad icon will be displayed on screen
4. Use mouse to point the icon for on-screen-display setting.
RS-232 Connection Please refer to the Setup option
In the program window (com2 default)
1.RX pin----SD (D-sub 9) pin 3 from PC
2.TX pin----RD (D-sub 9) pin 2 from PC
3.NC
4.GND------GND (D-sub9) pin 5
1/O port The port can send or received signal by external device.
Select option mode by OSD D/N function
The camera can switch day or night by external device when it select
External mode.
And other mode can send signal to external device. Day (oV0, Night (+5)
▲
Only applicable for WDS-HDR1527DN
5. SETTING MENU AND FUNCTIONS
SETUP MENU
CAMERA ID
OFF
SENSE UP
OFF
LIGHT CNTL
WD MODE
WHITE BAL
ATW
PICTURE
VIDEO
FOCUS ADJ
MISC
END INIT ↑ UNLOCK
5. Move cursor to INIT and press ENTER to return all parameters to the factory default
settings. (Don't press INIT unless it is necessary)
6. Move cursor to↑position and press ENTER key for menu position setting.
●
Applicable for WDS-HDR1527DN & WDS-HDR1520
▲ Only Applicable for WDS-HDR1527DN
1. Press the ENTER key to enter main menu.
2. Press UP/DOWN key to select the item for
adjustments.
3. Press ENTER key to enter the sub menu of
selected item.
4. Move cursor to END at the bottom of the screen
and press the ENTER to close the setup menu
and return to normal camera operation mode.
-5 -
Advertisement
