Custom Settings - Kodak Pixpro AZ651 User Manual

Custom Settings

The user can store the frequently used
shooting modes and parameters and switch to
this mode for quick adjustment.
Settings under mode (unset state or state
after reset):
1. Turn the mode dial to select the
and enter the setup screen, as shown in the
figure below:
Select one capture mode to define CS .
Auto Mode
Confirm
Exit
2. As shown in the figure, press the [
[ ] button to select a capture mode that
you want to define as
button to enter the shooting screen.
3. As shown in the figure, press the
and choose whether to continue the
mode setting or rotate the mode dial to skip.
mode,
]/
, and press the
button,
Go to setting CS mode
Rotate the mode dial to skip.
For setting under other modes (use this
method to select a different custom setting):
1. Select any mode to be stored.
2. Set your desired parameters in the current
mode.
3. Press the button, press the [
[ ] button to select
the button to enter the menu.
4. Press the [ ]/[
.
2
Yes
Or
]/
, and press
] button to select
49