1. Rotate the mode dial to
the Wi-Fi selection interface.
2. Press the [
]/[
and set options.
「
•
Settings」:
Customize the Wi-Fi settings for the
camera system.
「Station」:
•
Use the Station Mode to connect to
a "Personal Hotspot" created by your
mobile device.
「AP Mode」:
•
In AP mode, the camera will act as an
access point enabling another Wi-Fi
device to connect to it.
Rotate the mode dial to disconnect.
and then enter
] button to select
AP Mode
This camera may connect with your smart
device through Wi-Fi.
Settings of Camera:
1. Select
and press the
the setting interface.
2. Press the [
]/[
select options to be adjusted, and press
the
button to enter the option setting
interface.
AP mode
Setting pre-connected device for the
following serial number:
SSID: PIXPRO AZ651_XXXX
WPA2-PSK: XXXXXXXX
Refresh
• Refresh: Create a new WPA2 PSK
password.
• Back: Back to previous page.
button to enter
] button to
Back
37