Comfort Features; Seat Adjustments - Chevrolet 2006 Cobalt Getting To Know Manual

• Exterior Perimeter Lighting During
Remote Keyless Entry Unlock
• Security System: Passive or Remote
Keyless Entry Arming
• Select Language (English, French,
Spanish or German)
Warnings and Messages
If a problem is sensed in one of your
vehicle's systems, a warning or mes-
sage will appear in the DIC display (see
your Owner Manual for a complete list of
possible warnings and messages).
After a warning or message appears,
press the button to clear the display
screen for further use. Remember,
pressing the button only makes the
message disappear; it does not resolve
the problem.
Note: Your vehicle's warnings and mes-
sages provide critical information that
can prevent damage to your vehicle.
Review your Owner Manual to become
familiar with the information displayed
and the action required.
Check Engine or Other Warning
Lights with OnStar (if equipped)
If your vehicle is equipped with OnStar
and your Malfunction Indicator Lamp
(Check Engine Light) illuminates, or any
other warning message appears, you
can press the blue OnStar button and
speak to an OnStar Advisor. In many
vehicles, OnStar Advisors can access
certain diagnostic information and tell
you how serious the condition is and
what you should do about it.
See Section 3 of your Owner Manual.

COMFORT FEATURES

Seat Adjustments

A
B
Height Adjuster
To raise the driver's seat, lift and release
the front lever (A) on the left side of the
seat. Each time you raise the lever, the
seat will move up. Repeat until the seat
is at the desired height.
To lower the driver's seat, push down
and release the lever. Repeat until the
seat is at the desired height.
Forward or Rearward Adjuster
To move the front seats forward or rear-
ward, lift and hold the bar under the
front of each seat (B) and manually slide
the seat. Release the bar to lock the
seat in place. Try to move the seat to
ensure it is locked in place.
Recliner
To recline the front seats, lift the recline
lever (C) to release the seatback; then
move the seatback to where you want it.
Release the lever to lock the seatback in
place. Press rearward on the seatback
to ensure it is locked in place.
Lumbar Adjuster (if equipped)
To adjust the driver's seat lumbar
support, use the knob located on the
right side of the driver's seat cushion.
Turn the knob until the desired lumbar
support is reached.
See Section 1 of your Owner Manual.
5
C