Mirage 6678 User Manual page 229

Problem
The Wireless LAN/Bluetooth modules
cannot be detected.
The PC Camera module cannot be
detected.
The Wireless LAN/Bluetooth modules
cannot be configured.
A file cannot be copied to/from a
connected Bluetooth device.
I cannot obtain high speed Bluetooth data
transfer.
Possible Cause - Solution
The modules are off as the computer is in Airplane Mode. Check the LED
indicator to see if it is in Airplane Mode (see
9). Use the Fn + F11 key combination to toggle Airplane Mode on/off (see
Table 1 - 4, on page 1 - 12).
The module is off. Press the Fn + F10 key combination in order to enable the
module (see "Function/Hot Key Indicators" on page 1 -
application to view the camera picture.
The driver(s) for the module(s) have not been installed. Make sure you have
installed the driver for the appropriate module (see the instructions for the
appropriate module in "Modules & Options" on page 7 -
The transfer of data between the computer and a Bluetooth enabled device is
supported in one direction only (simultaneous data transfer is not
supported). If you are copying a file from your computer to a Bluetooth enabled
device, you will not be able to copy a file from the Bluetooth enabled device to
your computer until the file transfer process has been completed
To obtain high speed Bluetooth data transfer take into account the following:
• To achieve high speed transfer speeds, both devices must support high
speed data transfer (i.e both the computer and the Bluetooth compati-
ble device you are connecting to).
• Check your Bluetooth compatible device's documentation to confirm it
supports high speed data transfer, and for configuration information.
Problems and Possible Solutions 8 - 11
Troubleshooting
"LED Indicators" on page 1 -
13). Run the camera
1).
8