Sony DSC-T1 Cyber-Shot Operating Instructions Manual page 80

D Disconnecting the USB
cable from your computer,
removing the "Memory Stick
Duo" from your camera or
turning off th er during
USB connec
ForWindows 2000, MeqrXP
Double-click here
Click
~
(Sony DSC), then
3 Confinn the device on the
screen, then click [OK].
4 Click [OK].
Step 4 is unnecessary for Windows XP
users.
5 Disconnect the USB cable, remove the
"Memory Stick Duo" or turn off the
power.
For Windows 98 or 98SE users
Confinn that the access indicators (page 79)
on the LCD screen are turned white and
carry out only step 5 above.
80
Copying images using
"Image Transfer"
-
Windows 98/98SE/2000/Me
Connect the camera and your
computer with the USB cable and
the USB cradle.
"Image Transfer" launches and the images
are automatically copied to the computer.
When copying is complete, "ImageMixer"
automatically launches and images appear.
.
Normally "Image Transfer" and "Date" folders
are created inside the "My Documents" folder,
and all of the image files recorded with the
camera are copied into these folders.
.
You can change the "Image Transfer" settings
(page
81).
-
Windows XP
Connect the camera and your
computer with the USB cable and
the USB cradle.
"Image Transfer" starts up automatically
and the images are automatically copied to
the computer.
Windows XP is set so that the OS AutoPlay
Wizard activates.
If you want to cancel the setting, follow the
procedure below.
D
Click
[Start], then click [My
Computer].
II
Right-click [Sony
MemoryStick], then click
[Properties].
1'1
Cancel the setting.
CDClick [AutoPlay].
@ Set [Content type] to [Pictures].
@Check [Select an action to perform]
under [Actions], select [Take no
action], then click [Apply].
@ Set [Content type] to [Video files]
and proceed step @. Set [Content
type] to [Mixed content] and
proceed step
@.
@ Click [OK].
The [Properties] screen closes.
The OS AutoPlay Wizard does not start up
automatically even if the USB connection is
made next time.