Sony DSC-T1 Cyber-Shot Operating Instructions Manual page 67

II
Press MENU.
m
Select [OK] with ~,then press
..
The o-n indicator turns white. The
selected images are protected.
To exit the Protect function
Select [Cancel] in step
D
or select [Exit] in
step
m,
then press..
To cancel individual protection
Select the image to be unprotected with
J..!T/""/~, then press. in step I!I. The o-n
indicator turns
gray. Repeat this operation
for all images that are to be unprotected.
Press MENU, select [OK], and then press
..
To protect all images in the
folder
Select [All In This Folder] in step D, and
press.. Select [On], then press..
To cancel all protection of all
images in the folder
Select [All In This Folder] in step D, and
press.. Select [Off], then press..
Changing image
size
- Resize
Mode switch: [B
You can change the image size of a
recorded image, and save it as a new file.
You can resize to the following sizes:
SM,3M, 1M, VGA
The original image is retained even after
resizing.
Control button
MENU
o
Set the mode switch to eB.
B
Display the image you want to
resize with ""/~.
m
Press MENU.
The
menu appears.
D
Select 8
(Resize) with ""/~,
then press
..
m
Select the desired size with
J../
T, then press..
The resized image is recorded in the
recording folder as the newest file.
To cancel resizing
Select [Cancel] in step I!I.
.
You cannot change the size of movies or Multi
Burst images.
.
When you change from a small size to a large
size, the image quality deteriorates.
.
You cannot resize to an image size of 3:2.
.
When you resize a 3:2 image, the upper and
lower black portions will be displayed on the
image.
~
::::
3'
'" CCI
<b
<b
~
~
67