TV Operation Overview
TV Operation Overview
1. First, make all equipment connections. Plug the AC Adapter into the TV, then plug the AC Adapter into a power
outlet. At this time, the TV is switched to standby mode.
• In standby mode, press the
control or
,
/
2. Select the viewing source by pressing
• Note: See page 17 if you have not auto programmed the TV to receive channels in your local broadcast area.
3. After viewing, press the
standby mode.
NOTE
• If you want to turn the TV off, press the on/off button located on the TV. If you intend to be away on vacation,
disconnect the power plug from the wall power outlet.
Menu Language Selection
Menu Language Selection
- The menus can be shown on the screen in the selected language. First select your language.
1. Press the MENU button and then use
2. Press the
G G
button and then use
3. Press the
G G
button and then use
From this point on, the on-screen menus will be shown in the language of your
choice.
4. Press the EXIT button to save and return to TV viewing.
,
(
D
E
),
,
(
D
E
),
located on the TV to turn the TV on.
,
/
or
/
button on the remote control or
button to select the
D D
/
E E
button to select
D D
/
E E
button to select your desired language.
D D
E E
/
,
or number button on the remote
/
repeatedly.
located on the TV. The TV reverts to
/
menu.
.
Operation
15