Adding Another Link Mate And Hub To A Single Link Mate In Use - Samsung WAM270 User Manual

Adding another Link Mate and Hub to a single Link Mate in use

❚
When the Link Mate in use is connected to the router with a LAN cable
`
Disconnect the LAN cable from the Link Mate in use.
1
Connect the HUB to the wireless router with the LAN cable, and then plug in the
2
HUB's power cable.
Plug in the power cable of the new Link Mate. The new Link Mate's blue LED pairing
3
indicator starts to flash. Wait until the pairing indicator on the Link Mate stops flashing.
When the indicator stops flashing, pairing is complete. The Link Mate may also beep.
Turn off the old Link Mate by disconnecting the power cable. Then. connect it again.
4
DEVICE ADD
Press the
LED pairing indicator starts to flash. Wait until the pairing indicator on the Link Mate
stops flashing. When the indicator stops flashing, pairing is complete. The Link Mate
may also beep.
On your smart device, select the Samsung Multiroom app. Setup starts.
5
button on the back of the Link Mate. The Link Mate's blue
4444 40