Connections; Connecting With A Hub (Not Included); Connecting The Link Mate(S) To Your Network With A Hub (Not Included) - Samsung WAM270 User Manual

Connections

Connecting with a HUB (Not Included)

A
• If the Link Mate fails to connect to your network or its network connection operates
abnormally, place the Link Mate closer to the HUB or your router and try again.
• The Link Mate is a wireless network device. Its communications with your network may
be disrupted because of the distance between it and other devices on the network,
obstructions, or interference from other wireless devices.
Connecting the Link Mate(s) to Your Network with a HUB (Not
❚
Included)
NOTE
9 To produce audio through the Link Mate, you must connect it to an external device. (See page 12)
Press here
Connect a LAN cable to the router and the
1
HUB.
NOTE
9 You can connect the LAN cable to any
Attach the HUB's power cord to the power port on the rear of the HUB, and then plug
2
the power cord into an electrical outlet.
The power (
3
When the pairing indicator (
The pairing indicator on the Link Mate starts to flash.
If the HUB's pairing indicator does not flash, press the
HUB.
Plug In
HUB
LAN
Wireless Router
) and the HUB ( ) indicators on the HUB's front turn on.
) begins to flash, plug the Link Mate(s) into an outlet.
Plug In
ETHERNET SWITCH
ETHERNET SWITCH
Port on the HUB.
SPK ADD
4444 18
on the back of the
button on the rear of the