Chevrolet Captiva Owner's Manual page 41

5. Repeat Steps 1-4 for the other
seatback, if necessary.
When the seatback is not in use, it
should be kept in the upright, locked
position.
Reclining the Rear Seatback
To recline the seatback:
1. Lift and hold the lever on top of the
seatback.
2. Tilt the seatback rearward, and then
release the lever.
3. Repeat Steps 1 and 2 for the other
seatback, if desired.
To return the seatback to the upright
position:
1. Lift and hold the lever on top of the
seatback.
2. Pull the seatback forward to the
upright position, and then release
the lever.
3. Push and pull on the seatback to
make sure it is locked.
4. Repeat Steps 1-3 for the other
seatback, if necessary.
Tumbling the Second-Row Seats
Caution
A second-row seat cannot be
tumbled when the seatback is in the
folded position. The second-row
seatback must be in the upright
position before using the lever on the
outboard side of the seatback to
tumble the seat.
Folding a rear seat with the safety
belts still fastened may cause
damage to the seat or the safety belts.
Always unbuckle the safety belts and
return them to their normal stowed
position before folding a rear seat.
Second-row seats can be tumbled to
access the third-row seat.
To tumble the seat:
1. Unbuckle the rear safety belts and
put the front seatback in the upright
Seats and Restraints 2-11
position. See Reclining Seatbacks
on page 2-6.
2. Push the headrests down all the
way. See Head Restraints Position
on page 2-2.
3. Pull the lever forward on the outside
of the seatback and fold the seat-
back.
The seat will tumble forward auto-
matically and air-pressurise support
rods will hold the seats folded.
4. Repeat Steps 1-3 for the other seat,
if desired.