Yamaha RSio64-D Owner's Manual page 13

u WORD CLOCK IN connector
This is a BNC connector used to receive word clock
signals. The WORD CLOCK IN connector is internally
terminated with 75Ω.
i Dante [PRIMARY] connector
Dante [SECONDARY] connector
These etherCON (RJ45) connectors allow connection
with Dante devices such as a CL series console using
standard Ethernet cables (CAT5e or better
recommended).
NOTE
• Use STP (Shielded Twisted Pair) cable to prevent
electromagnetic interference. Make sure that the metal
parts of the plugs are electrically connected to the STP
cable shield by conductive tape or comparable means.
• Connect only Dante-compatible devices or Gigabit Ethernet
compatible devices (including computers).
• Cables up to 100 meters* long can be used.
* Maximum usable length varies according to the cable
used.
o Dante [PRIMARY LINK/ACT] indicator
Dante [PRIMARY 1G] indicator
Dante [SECONDARY LINK/ACT] indicator
Dante [SECONDARY 1G] indicator
Displays the transmission status with the Dante
network.
These indicators flash rapidly if the Ethernet
LINK/ACT
cables are connected properly.
These indicators are lit when the Dante net-
1G
work is functioning as Gigabit Ethernet.
!0 Exhaust vent
The RSio64-D is equipped with a cooling fan. Air is
exhausted through this vent, so take care that it is not
blocked by any obstruction.
Exhaust vent
Rear Panel
13
Owner's Manual