LG 42PM1M Owner's Manual page 36

U514Aen 98/2/18 4:26 AM
External Control Device Setup
07. Contrast (Command 2 : g)
G To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to 'Real data mapping 1'. See page 35.
Ack
[g][ ][Set ID][ ][OK][Data][x]
08. Brightness (Command 2 : h)
G To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to 'Real data mapping 1'. See page 35.
Ack
[h][ ][Set ID][ ][OK][Data][x]
09. Color (Command 2 : i)
G To adjust the screen color.
You can also adjust color in the PICTURE menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to 'Real data mapping 1'. See page 35.
Ack
[i][ ][Set ID][ ][OK][Data][x]
10. Tint (Command 2 : j) (option)
G To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0 ~ Green : 64
* Refer to 'Real data mapping 1'. See page 35.
Ack
[j][ ][Set ID][ ][OK][Data][x]
36 Plasma Monitor
Page 36
11. Sharpness (Command 2 : k)
G To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to 'Real data mapping 1'. See page 35.
Ack
[k][ ][Set ID][ ][OK][Data][x]
12. OSD Select (Command 2 : l)
G To select OSD (On Screen Display) on/off when con-
trolling remotely.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0 : OSD off
Ack
[l][ ][Set ID][ ][OK][Data][x]
13. Remote control lock mode (Command 2 : m)
G To lock the front panel controls on the monitor and remote
control.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0 : Lock off
Ack
[m][ ][Set ID][ ][OK][Data][x]
* If you're not using the remote control, use this mode.
When main power is on/off, external control lock is
released.
14. Split Zoom (Command2:p)
G To operate split zoom function and select the split
zoom section number.
Transmission
[k][p][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max:99
•
Refer to 'Real data mapping 2'.
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
* Real data mapping 2
0 : Reset split zoom
21: Selection 1 of 2 split zoom
24: Selection 4 of 2 split zoom
41: Selection 1 of 4 split zoom
42: Selection 2 of 4 split zoom
44: Selection 4 of 4 split zoom
45: Selection 5 of 4 split zoom
91: Selection 1 of 9 split zoom
99: Selection 9 of 9 split zoom
1 : OSD on
1 : Lock on