U514Aen
98/2/18 4:26 AM
Screen Adjustment
Screen Adjustment
Auto
Adjustment
Auto
Adjustment
- RGB (PC) mode only; This function doesn't work for RGB (DTV) mode.
- Automatically adjusts picture position and minimizes image shaking.
- After adjustment, if the image is still not correct, your set is functioning properly but needs further adjustment.
- The
and
1. Press the MENU button and then use
2. Press the
button and then use
G G
3. Press the
G G
button to run Auto configure.
• When
• If the position of the image is still not correct, try Auto adjustment again.
4. In RGB (PC) mode, if the image needs to be adjusted more after using
, you can make further adjustments with the
Setting Picture Format
Setting Picture Format
- Caution: If a 4:3 fixed image is on the screen for a long time, it may remain visible.
- Set every aspect ratio for Video, Component 480i sources.
- Use 4:3 or 16:9 for other RGB(PC), HDMI(PC) sources.
- Horizon is not available for RGB (DTV), HDMI (DTV), and Component (DTV) sources.
1. Press the ARC button repeatedly to select the desired picture format. You can also adjust
•
Choose
when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the left and right sides.
•
Choose
when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.
•
Choose
when you want to adjust the picture in a non-linear proportion, that is, more enlarged at both sides, to create
a spectacular view.
•
- Choose
when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped.
Manual Configure
Manual Configure
- If the image still isn't clear after auto adjustment and especially if characters are still jittery, adjust the picture Phase
manually.
- To correct the screen size, adjust
- Phase, Clock, H-position, V-position function works in the following mode : RGB-PC.
- Only H-position, V-position function works in the following mode :RGB-DTV, COMPONENT (480p, 720p,1080i), HDMI-
DTV (480p, 720p,1080i) mode.
1. Press the MENU button and then use
2. Press the
button and then use
G G
3. Press the
G G
button and then use
or
4. Use the
F F / G G
button to make appropriate adjustments.
• The
adjustment range is 0 ~ 63.
• The
adjustment range is -20 ~ +50.
5. Press the ENTER button to save.
26 Plasma Monitor
Page 26
are not active in HDMI mode.
button to select the
D D / E E
button to select
D D / E E
has finished,
will be seen on the screen.
.
button to select the
D D / E E
button to select
D D / E E
button to to select
D D / E E
.
menu.
.
option.
menu.
.
,
,
SCREEN
SCREEN
G G
To set
Auto config.
Manual config.
VGA Mode
ARC
Zoom +/-
Position
Cinema
NR
Reset
Prev.
MENU
in the
menu.
SCREEN
SCREEN
Auto config.
Phase
0
Manual config.
G G
VGA Mode
Clock
0
ARC
H-position 0
Zoom +/-
V-position 0
Position
Cinema
NR
Reset
MENU
Prev.