Adjusting Main And Sub Picture Sizes For Twin Picture; Swapping The Pip/Twin Picture; Pop (Picture-Out-Of-Picture: Channel Scan) - LG 26LX1D Owner's Manual

Adjusting Main and Sub Picture Sizes for Twin Picture

Use the D D / E E / F F / G G button to change main and sub picture sizes in Twin Picture mode.
i.e)
Use the SWAP button to switch the main and sub pictures.
• Component 1, Component 2, RGB-PC (or RGB-DTV), HDMI/DVI input sources for the main picture can't be used to swap
the main and sub pictures.
PIP
Main Picture
Twin
Picture
- Use POP to search the programs of all the memorized channels one-by-one on the 3 PIP screen display, (while
the main picture source remains the current channel). The pictures of all the programmed channels are
searched with the 3 POP screen.
- Run EZ Scan channel search before using POP mode.
- When Sub pictures are changed from the TV/DTV to CATV/CADTV in POP mode, it may make a noise from
the Tuner switch.
D D
F F TV 2-0
E E
TV 4-0
TV 6-0
If screen is adjusted to the
maximal size, the large
screen is filled with entire
screen vertically as shown.

Swapping the PIP/Twin Picture

SWAP
Sub Picture
SWAP

POP (Picture-out-of-Picture: Channel Scan)

1. Press the PIP button to activate the POP mode while in PIP mode.
• Channel selection: Use
searched on the PIP screen to shift it for viewing on the Main screen.
• PIP selection: Use
mode.
• When watching TV on Main picture, TV or DTV on Sub pictures are in channel
scanning. However, when watching DTV on Main picture, only TV on Sub pic-
ture is in channel scanning.
2. Press the EXIT button to cancel POP mode.
F F button to enlarge the selected channel being
button to select one of 3 PIP screen pictures in POP
D D / E E
Operation
95