Screen Setup for PC mode
- When RGB connect to PC input and select the RGB-PC in Main Input, this function is used.
- When HDMI/DVI connect to PC input and select HDMI/DVI input, this function is used.
- In RGB-DTV mode, SIZE and PHASE is not available.
- In HDMI/DVI-PC mode, PHASE is not available.
- After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality.
* Adjustment for screen Position, Size, and Phase
Mini Glossary
Position This function is to adjust
picture to left/right and
up/down as you prefer.
Size
This function is to mini-
mize any vertical bars or
stripes
visible
screen background. And
the horizontal screen size
will also change.
Phase
This function allows you to
remove
any
noise and clear or sharpen
the image of characters.
* Initializing (Reset to original factory values)
- To initialize the adjusted values
Adjust
1
Press the ADJUST button and then use
2
Press ENTER button and then use
priate adjustments.
• The
• The
on
the
3
Press ENTER button.
horizontal
Adjust
1
Press the ADJUST button and then use
2
Press ENTER button and then use
3
Press ENTER button.
POSITION
G G
SIZE
D D
F F
G G
PHASE
E E
RESET
Close
, or
.
adjustment range is -16 ~ +16.
adjustment range is -50 ~ +50.
POSITION
SIZE
Initialize Settings
PHASE
RESET
G G
Close
option.
button to select
D D / E E
D D / E E / F F / G G
buttons to make appro-
button to select the
D D / E E
F F / G G
button to select
Installation
,
.
35