Honda XR125LK Owner's Manual page 124

dummyhead dummyhead
CLUTCH
REMOVAL
Remove the following:
– Right crankcase cover (page 10-4)
– Oil pump driven gear [1]
– Screws [2]
– Oil filter rotor cover [3] and gasket [4]
Install the gear holder between the primary drive and
driven gears, and loosen the oil filter rotor lock nut [1].
TOOLS:
[2] Gear holder
[3] Lock nut wrench
Remove the lock nut, washer [4] and oil filter rotor [5].
Loosen the clutch lifter plate bolts [1] in a crisscross
pattern in several steps.
Remove the bolts, lifter plate [2] and clutch springs [3].
Attach the clutch center holder [1] to the pressure plate
using the four clutch lifter plate bolts to hold the clutch
center, and then loosen the lock nut [2].
TOOL:
Clutch center holder
Remove the lock nut, then the clutch center holder.
07724-0010200
07716-0020100
07GMB-KT70101
CLUTCH/GEARSHIFT LINKAGE
[3]
[2]
[5]
[3]
[1]/[3]
[2]
[2]
[4]
[1]
[2]
[1]/[4]
[1]
10-7