Special Characters; Using Tabs; Using Mixed Formats - Dymo LabelPoint 250 User Manual

A label can be underlined or enclosed in a box, but not
both together.
To add an underline or box style
>
1. Press the key.
2. Select underline or a box style and press
On multi-line labels, both lines are underlined. In box
style mode, all the lines are enclosed in one box style.
Creating Multiple-Line Labels
You can print a maximum of two lines on
3/8" (9 mm) and 1/2" (12 mm) labels.
To create a multiple-line label
1. Type the text for the first line, and press
line character is displayed at the end of the first
line, but will not print on the label.
2. Type the text for the second line.

Using Mixed Formats

You can apply different fonts and format styles to the
text on a label by inserting format breaks to divide the
label into blocks or sections of text. You can add two
format breaks allowing you to apply three separate
formats per label.
!
Alignment, underline, and box styles cannot be
mixed on a label. These styles are common to the
entire label.
To add a format break
1. Enter and format text for the first section.
2. Press .
3. Select Format Break and press
section character
first section, but will not print on the label.
4. Continue entering and formatting text for the next
section of the label.
. A new
. A new
is displayed at the end of the

Using Tabs

You can add tabs to a label to align text on multi-line
labels. Tabs are left justified and the default spacing is
2.0"(50 mm).
.
To change the tab spacing
1. Press
2. Select Set Tab Length and press
3. Use the up and down arrow keys to increase or
decrease the tab setting, and then press
To insert a tab
1. Enter your text.
2. Press
3. Press
Using Symbols and

Special Characters

Symbols and other special characters can be added to
your labels.
.
and select Insert Tab.
and continue entering text.
Figure 10
.
.
7