Fan Removal And Replacement - Lincoln Electric PRO-CUT 25 Service Manual

F-43
Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician or
machine operator and will invalidate your factory warranty. For your safety and to avoid
electrical shock, please observe all safety notes and precautions detailed throughout this
manual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical
troubleshooting assistance before you proceed. Call 1-800-833-9353 (WELD).
DESCRIPTION
The following procedure will aid the technician in removing the fan for maintenance or
replacement.
MATERIALS NEEDED
4mm Allen Wrench
Crescent Wrench
7mm Nut Driver
Phillips Head Screwdriver
TROUBLESHOOTING & REPAIR

FAN REMOVAL AND REPLACEMENT

WARNING
This procedure takes approximately 12 minutes to perform.
PRO-CUT 25
F-43