Dvd And Video Cd Operation; Playing A Dvd Or Video Cd; General Features - LG LST-3510A Owner's Manual

DVD and Video CD Operation

Playing a DVD or Video CD

Playback Setup
DVD
Turn on the TV and select the video input source con-
nected to the DVD/HDTV Receiver.
Audio system: Turn on the audio system and select
the input source connected to the DVD/HDTV
Receiver.
Press OPEN/CLOSE to open the disc tray.
1 1
Load your chosen disc in the tray, with the
2 2
playback side down.
Press OPEN/CLOSE to close the tray.
3 3
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead.
If a menu screen is displayed
A menu screen may be displayed first after loading a
DVD or Video CD with menus.
DVD
Use the 1 1 2 2 3 3 4 4 buttons to select the title/chapter you
want to view, then press
Press TITLE or DISC MENU to return to the menu
screen.
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the menu screen.
Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on the each menu screen.
You also may set PBC to Off under setup. See page
43.
otes
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
"Parental Control", on page 44).
– DVDs may have a region code.
The DVD/HDTV Receiver will not play discs that have
a region code different from the DVD/HDTV Receiver.
The region code for this DVD/HDTV Receiver is
1 (one).
VCD2.0 VCD1.1
(SELECT) to start playback.

General Features

ote
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.
Changing TITLEs
1 /3
If a disc has more than one title, you can move to
another title as follows:
Press DISPLAY in Stop mode, then press the appro-
priate numbered button (0-9) to select a title number.
Changing CHAPTER/TRACKs
VCD1.1 1 /12
DVD
If a title on a disc has more than one chapter or a disc
has more than one track, you can move to another
chapter/track as follows:
Press SCAN/SKIP . or > briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY. Then, use 3 3 /4 4 to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
ote
For two-digit numbers, press the numbered buttons
(0-9) in rapid succession.
Search
DVD VCD2.0
1. Press and hold SCAN/SKIP . or > for about
two seconds during playback.
The DVD/HDTV Receiver will now go into SEARCH mode.
2. Press and hold SCAN/SKIP . or > repeatedly
to select the required speed: mX2, mX4,
mX16, mX100 (backward) or MX2, MX4,
MX16, MX100 (forward).
With a Video CD, the Search speed changes:
mX2, mX4, mX8, (backward) or MX2,
MX4, MX8, (forward).
3. To exit SEARCH mode, press PLAY.
Still Picture and Frame-by-Frame Playback
DVD VCD2.0 VCD1.1
1. Press PAUSE/STEP during playback.
The DVD/HDTV Receiver will go into PAUSE mode.
2. You can advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly on the remote
control.
3. To exit still motion mode, press PLAY.
DVD
1 /3
VCD1.1
45