Hd Monitor Dvi-Hdtv Connections - LG LST-3510A Owner's Manual

Connections (Continued)

HD Monitor DVI-HDTV Connections

Antenna
1 1 Connect the "Antenna/Cable" to the "ANT IN" jack on the DVD/HDTV Receiver using a coaxial RF cable.
1 1
ote
There might be some areas where the signal strength could be too high. If so, you may need to connect the
antenna to an optional attenuator. Screw the attenuator onto the "ANT IN" jack. (Refer to page 12.)
Connect the "ANT LOOP OUT" jack on the DVD/HDTV Receiver to the "Antenna In" jack on your TV using a
2 2
coaxial RF cable.
Connect the "DVI-HDTV OUT" jack on the DVD/HDTV Receiver to the "DVI IN" jack of your TV using DVI-type
3 3
connector. (The Output Selection must be set to DVI, refer to Setting the Display Format on page 19)
Connect the L/R "AUDIO OUT" jacks on the DVD/HDTV Receiver to the L/R "AUDIO IN" jacks on your TV using
4 4
RCA-type cables.
ote
• DVI-HDTV OUT is useable if 1080i, 720p, or 480p display format is selected.
• A DVI-HDTV input is one that is compliant with EIA-861 and HDCP specifications. Check your TV or monitor's
user manual to find out if the TV or monitor's DVI input is compliant with these specifications.
• Some HD Monitors designed for PC applications using DVI-D may not work with this connection.
16
Cable TV
Wall Jack Panel
OR
HD Ready TV Connection Panel
ANTENNA S-VIDEO
AUDIO INPUT
INPUT INPUT
R
L
DVD/HDTV Receiver Connection Panel
VIDEO
DVI-HDTV INPUT
INPUT