Programmed Playback - Zenith ZDX-313 Installation And Operating Manual

Programmed Playback

Programmed Playback
The program function enables you to store your
favourite tracks from any disc in the player memory.
A program can contain 30 tracks.
1. Insert a disc.
AUDIO CD or MUSIC menu appears.
2. Press PROGRAM.
The mark will appear to the right of the word
E
"Program" on the right side of the menu screen.
Audio CD Program Menu
MP3/WMA Program Menu
N o t e :
Press PROGRAM again, the
exit the Program Edit mode.
3. Select a track on the "List", then press ENTER to
place the selected track on the "Program" list.
Repeat to place additional tracks on the list.
4. Press B.
Select the track you want to start playing on the
"Program" list.
5. Press N (PLAY) or ENTER to start. Playback
begins in the order in which you programmed the
tracks. Playback stops after all of the tracks on
the "Program" list have played once.
6. To resume normal playback from programmed
playback, select a track of AUDIO CD (or MUSIC)
list and then press N (PLAY).
Repeat Programmed Tracks
1. Press REPEAT when playing a disc. The repeat
2. Press REPEAT to select a desired repeat mode.
N o t e :
If you press > once during Repeat Track playback, the
repeat playback will be cancelled.
Erasing a Track from "Program" List
1. During STOP mode, press PROGRAM and
2. Use B / v / V to select the track that you wish to
3. Press CLEAR. Repeat to erase additional tracks
Erasing the Complete Program List
1. During STOP mode, press PROGRAM and
2. Use B / v / V to select "Clear All" in the
Note:
The programs are also cleared when the disc is removed.
E mark will disappear to
icon appears.
• Track: repeats the current track
• All: repeats all the tracks on programmed list.
• Off (No display): does not play repeatedly.
mark will appear.
erase from the Program list.
on the list.
mark will appear.
"Program" list, then press ENTER.
E
E
33