Installation And Setup; Setting Up The Unit; The Unit Connection - LG HOME THEATER SYSTEM LHT764 Owner's Manual

5-dvd changer home theater system
Hide thumbs Also See for HOME THEATER SYSTEM LHT764:
Table of Contents

Advertisement

Installation and Setup
Setting
up the unit
The picture and sound of a nearby TV, VCR, or radio
may be distorted during
playback.
If this occurs,
position the unit away from the TV, VCR, or radio, or
turn off the unit after removing
the disc.
The unit Connection
Depending
on your TV and other equipment
there are
various
ways you can connect the unit. Please refer to
the manuals
of your TV, stereo system or other
devices as necessary
for additional
connection
information.
Component
Video
(ColorStream
_) connection
Connect the COMPONENT
VIDEO OUT jacks on
the unit to the corresponding
jacks
on the TV
using a Y PB PR cable (C).
• if your television
is a high-definition
or "digital
ready" television,
you may take advantage
of the
unit's progressive
scan output for the highest
video resolution.
• if your TV does not accept your resolution
setting,
abnormal
picture appears
on the screen.
Please read owner's
manual
for TV then set the
resolution
that your TV can accept.
Notes:
• You can change
the resolution
(480i
480p, 720p,
1080i) for the COMPONENT
VIDEO
OUT by
pressing
RESOL. on the Remote Control.
• For 720p and 1080i resolution,
only non-copy
protected
discs can be played
back. if the disc is
copy protected,
it will be displayed
at the 480p
resolution.
The resolution
(720p, 1080i) is for the component
and HDMI outputs
only.
• The HDMI mode must be set to OFF for Component
video connections.
• The resolution
(720p, 1080i) does not work with the
analog video connections
(VIDEO OUT).
Rear of TV
Video
Connections
to Your TV
Make sure the unit is connected
directly to the TV and
not to a VCR, otherwise
the DVD image could be
distorted
by the copy protection
system.
Connect the MONITOR
OUT jack on the unit to the
video in jack on the TV using the video cable (V).
Notes:
• For MONITOR
OUT jack connection
resolution
must be set to 480i or 480p by pressing
RESOL.
on
the Remote Control,
however
MONITOR
OUT is
always at 480i standard
resolution.
• HDMI mode must be set to OFF for VIDEO OUT
jack connection.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!=
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!_i_i'_

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lht754 - home theater systemSh92sb-sSh92sb-cSh92sb-w

Table of Contents