Setting Up The Projector For A Wireless Lan Connection (With The Optional Usb Wireless Lan Unit Equipped) [Wirless Lan] - Dukane 6135W User Manual

Setting up the Projector for a Wireless LAN Connection (with the optional USB Wireless
LAN Unit equipped) [WIRLESS LAN]
Important
• Consult with your network administrator about these settings.
• When using a wireless LAN connection, attach the optional USB Wireless LAN to the projector. (→ page 115)
[PROFILE]
[RECONNECT]
When you connect with your computer to save your profile and select "Automatically connect when within range" from
the Properties tab of Wireless Network in Windows for your selected profile, your wireless LAN will be accessed under
the following conditions:
• at the time of turning on the computer or the projector
• when the notebook type is within the range of the projector's wireless LAN can be achieved.
Data transmission between wireless LAN and wired LAN is not possible.
When the [SIMPLE ACCESS POINT] mode is used to send images, it is recommended to connect to only one com-
puter.
[DISABLE]
[SIMPLE ACCESS
POINT]
[PROFILE 1]
[PROFILE 2]
Retry to connect the projector to a network. Try this if you have changed [PROFILE].
Wireless LAN connection will be turned off
Set the projector for simple access point.
Selecting [SIMPLE ACCESS POINT] will allow the projec-
tor to create an infrastructure network. The IP address of
the projector will be set automatically.
Select "Obtain an IP Address Automatically" to set the IP
address of a connected computer.
Up to two settings for the USB wireless LAN unit can be
stored in memory of the projector. (→ page 48)
To recall the settings from memory, select [PROFILE 1] or
[PROFILE 2] from [PROFILE].
97
5. Using On-Screen Menu