Remark #2:
Data Recall only will reset current Color Temp. data to default. For this case only
Cool Color Temp. will be reset to TV set. To reset Neutral and Warm adjustment we
need to change Color Temp. to intended Color temp. and execute Recall Data
operation again.
Data Save is needed for every Color Temp. once Recall Data is executed to save the
default data
7)
To get original WB data if panel or Board is changed, please execute Data recall for each color temp.
Press
8)
AC Off and ON is needed after Recall data.(For function 6(ii)).
Short time flicker (White pattern changes 3 times) can be observed to verify the Copy Data operation is working.
KDL-32R500C, 505C, 507C, 40/48R510C, 550C, 555C, 557C
Press Enter
ADJUSTMENT
Return to
original WB
data
35