Sony KDL-32R500C Service Manual page 125

7. After 20-30 seconds, the LED is turn to Amber and blink.
 LED blinking indicates "Under SW Update".

IMPORTANT NOTE: PLEASE DO NOT PULL OUT

THE AC PLUG DURING THIS STATE.
8. After 1-2 minutes, LED blinking will finish. Please press <Power> key.
If "SONY" Logo displays the screen and LED is turn to GREEN, Software update is success!!
9. Pull out the USB pen drive from TV.
TV on standby and Enter Service Mode. Press "i+ (info)", "5", "Volume +" then "TV power" on remote.
10.
Select "Status Information" item and Press <Enter> key.
11.
12. Confirm SW,NVM,Boot,Panel ID,PQ,AQ Version.
13
13. Press <Return> to back Service Mode Menu.
Select "UART Selection" by ↑↓ key, and select "No log" item by ←→ Key and press <Enter> key for Selection.
14.
15. Pull Out the AC plug and wait 10 second (considering the charge of AC adaptor).
16. Insert the AC plug.
17. Press <Power> Key to turn on the TV.
KDL-32R500C, 505C, 507C, 40/48R510C, 550C, 555C, 557C
APPENDIX-1
12
15
125 125