Adding Another M5 And Hub To A Single M5 In Use - Samsung M5 WAM550 User Manual

❚

Adding another M5 and Hub to a single M5 in use

When the M5 in use is connected to the router with a LAN cable
`
Disconnect the LAN cable from the M5 in use.
1
Connect the HUB to the wireless router with the LAN cable, and then plug in the
2
HUB's power cable.
Plug in the power cable of the new M5. The new M5's blue LED pairing indicator starts
3
to flash. Wait until the pairing indicator on the M5 stops flashing. When the indicator
stops flashing, pairing is complete. The M5 may also beep.
Turn off the old M5 by disconnecting the power cable. Then. connect it again.
4
Press the
SPK ADD
indicator starts to flash. Wait until the pairing indicator on the M5 stops flashing. When
the indicator stops flashing, pairing is complete. The M5 may also beep.
On your smart device, select the Samsung Multiroom app. Setup starts.
5
button on the back of the M5. The M5's blue LED pairing
44
34