LG HN7413AG User's Manual & Installation Instructions page 15

SETTING THE CONTROLS
SETTING THE POWER LEVEL
The power level for the selected Cooking Zone
can be set from to
to
To adjust the power level:
Touch the or
1
Cooking Zone.
Touching will set the power level to
Touching will set the power level to
Touch the or
Cooking Zone to increase or decrease the
power level.
If power level is selected, the Cooking
Zone will turn off after 5 seconds.
2 For faster power level adjustments, touch
and hold the or
desired setting is reached.
NOTE: Normal power
settings range in 1/2 step
increments for power
levels from 2 to 6 to
allow precision cooking.
A dot will appear next to
the number to indicate a
1/2 power level step.
3 If the Cooking Zone
for more 10 seconds, the timer display will
show the error message
error message, press the ON/OFF pad for
the Cooking Zone you were setting. This
message does NOT relate to the timer pad.
To turn off the cooking zone:
Once cooking is complete, touch the
1
ON/OFF pad to turn the cooking zone OFF.
2 The corresponding cooking zone display witll
turn off.
If the POWER pad is touched instead of
3
ON/OFF, the entire cooktop will turn off.
O P E R AT I N G I N S T RU C T I O N S
and (Boost).
pad for the selected
.
.
pad of the selected
pads until the
or pads are held
. To clear this
NOTE:
• If the cookware or pan is moved from the
center of any active Cooking Zone for any
reason, a sensor will detect this and the
Cooking Zone will no longer heat. The display
for that Cooking Zone will flash the last power
level setting for the Cooking Zone.
• The Cooking Zone will remember the power
level setting for up to 90 seconds before the
Cooking Zone will automatically shut off.
WARNING
Your cooktop has a residual heat indicator
for each Cooking Zone. This indicator will warn
that this area has been used and is still giving
off enough heat to cause burns.
Avoid touching the burner when this
indicator is shown. Although the cooktop
is OFF, the will stay lit until the
cooktop has cooled down.
15