Table of Contents
Advertisement
Precautions
Refer installation work to the dealer.
Installation work requires technique and experi-
ences. Failure to observe this may cause fire,
electric shock, injury, or damage to the product.
Be sure to consult the dealer.
Stop the operation immediately when
something is wrong with this product.
When smoke goes up from the product, the smell
of smoke comes from the product, or the exterior
of the product has deteriorated, continued use
will cause a fire or the product to fall, resulting in
injury, accidents, or damage to the product.
Turn the power off immediately and contact
qualified service personnel for service.
Do not attempt to disassemble or modify
this product.
Failure to observe this may cause fire or electric shock.
Consult the dealer for the repair or inspections.
Do not insert any foreign objects.
Fire or electrical shock may be caused if water
or any foreign objects, such as metal objects,
enter inside the unit.
Turn the power off immediately and contact
qualified service personnel for service.
Select an installation area that can sup-
port the total weight.
Selecting an inappropriate installation surface
may cause the product to fall down or topple
over, resulting in injury.
Installation work shall be started after sufficient
reinforcement.
Periodic inspections shall be conducted.
Rust on the metal parts or screws may cause
the product to fall, resulting in injury or acci-
dents.
Consult the dealer for the inspections.
Do not use this product in an inflammable
atmosphere.
Failure to observe this may cause an explosion
resulting in injury.
Avoid installing this product in the loca-
tions where salt damage occurs or corro-
sive gas is produced.
Otherwise, the mounting portions will deteriorate and
accidents, such as this product falling, may occur.
The exclusively designed mount bracket
shall be used.
Failure to observe this may cause the product
to fall, resulting in injury or accidents.
Use the exclusively designed mount bracket
when installing on a ceiling or wall.
The screws and bolts must be tightened to
the specified torque.
Failure to observe this may cause the product
to fall, resulting in injury or accidents.
Do not install this product in locations
subject to vibration.
Loosening of mounting screws or bolts may
cause the product to fall, resulting in injury.
Install this product in a location high
enough to avoid people and objects from
bumping the product.
Failure to observe this may cause the product
to fall, resulting in injury or accidents.
Do not strike or give a strong shock to this
product.
Failure to observe this may cause fire or injury.
Turn the power off when wiring this product.
Failure to observe this may cause electric shock. In
addition, a short circuit or wrong wiring may cause
fire.
Only attach a suitable camera to this
microphone.
Failure to observe this may cause the product
to fall, resulting in injury.
Do not touch this product, the power cord
or the connected cables during thunder
(even in the process of work).
Failure to observe this may cause electric shock.
Correctly perform all wiring
Short circuits in the wiring or incorrect wiring
may cause fire or electrical shock.
Do not install this product outdoors or
under eaves
Otherwise, the mounting portions will deterio-
rate and accidents, such as this product falling,
may occur.
9
Advertisement
Table of Contents
