D-Link DWL-3200AP Manual page 60

DWL-3200AP User's Manual
Device Configuration > DHCP
DHCP Server:
Dynamic Pool
Static Pool
IP Assigned From:
Range of Pool (1~255):
SubMask:
Gateway:
D-Link Systems, Inc.
Enable or disable the DHCP server function.
Click to enable Dynamic Pool Settings. Configure the IP address
Settings: pool in the fields below.
Click to enable Static Pool Settings. Use this function to assign the
same IP address to a device at every restart. The IP addresses
Settings:
assigned in the Static Pool list must NOT be in the same IP range as
the Dynamic Pool.
Enter the initial IP address to be assigned by the DHCP server.
Enter the number of allocated IP addresses.
Enter the subnet mask.
Enter the gateway IP address, typically a router.
Wins:
Wins (Windows Internet Naming Service) is a system that determines
the IP address of a network computer with a dynamically assigned
IP address, if applicable.
Using the AP Manager
60