^ Remove cap h from the bearing
bush in the door and refit on the
opposite side.
^ Remove clamp i from underneath
the door and fit it on the opposite
side.
Changing the door hinging
^ Pull hinge pin a with disc b
upwards to remove them.
^ Remove cap c.
^ Undo screws d and take hinge plate
e off.
^ Slightly loosen bearing screw f from
hinge plate e. Screw it into the hole
on the other side of hinge plate e
and then tighten the screw again.
^ Place cap c in the other hole.
^ Remove cover h.
^ Undo screw g and screw it into the
outermost hole on the other side.
^ Rotate cover h by 180° and click it
into the holes on the other side.
41