Backrest Upholstery; Footrest Supports - Invacare Action 2 NG Range User Manual

The backbrace (B) (photos 4 & 5) links the two push han-
dles and must always be in position on recliner version (see
paragraph 2.6.1).Avoid operating levers (A) (
sideways transfer, for example, in order to prevent destabili-
sing the user's position !
To ensure safety for the user, when backrest is reclined, we
recommend to use anti-tippers (available as an option).
Maintenance of reclining backrest mechanism varies with
use. Please contact your Dealer.
Based upon the development of your disability, you can choose
2
an Action NG backrest that meets your needs. Please consult
with your Dealer.
18
The hanging of back packs or similar items onto your
chair backposts can affect the rearward stability of your chair,
especially when used in combination with recliner backrests.
This can cause the chair to tip backwards causing injury.
Therefore, Invacare® strongly recommend the use of anti-
tippers (available as an option) when using your backposts to
carry a back pack or similar items.
during a
photo 5)
B
4
B

2.1.3 Backrest upholstery

- Standard upholstery backrests
• The padded backrest provides excellent daily comfort for
the user who does not need specific support for the upper
body.
In the event that the upholstered backrest slackens, ask for
a replacement from your Dealer.

2.1.4 Footrest supports

- Standard footrest supports (photo 6) swing away during
transfers and can be removed during transport.
Operate lever (A) by pushing sideways and swivelling towards
outside or inside in case there is not enough space. To return
to the initial position, align the footrest support it locks auto-
matically.
To remove the footrest support, simply pull up after
unlocking the assembly. Reverse the procedure to reassem-
ble, while still in the unlocked position.
A
5
A
6