Buick Enclave Owner's Manual page 61

To stop recall movement, press one
of the power seat controls, memory
buttons, power mirror buttons, or
the power steering column control,
if available.
If something has blocked the
driver seat and/or steering column
while recalling a memory position,
the recall may stop. Remove the
obstruction; then press and hold
the appropriate manual control for
the memory item that is not recalling
for two seconds. Try recalling the
memory position again by pressing
the appropriate memory button.
If the memory position is still not
recalling, see your dealer for
service.
Easy Exit Positions
The easy exit feature can move the
driver seat rearward and the power
steering column, if available, up and
forward to allow extra room to exit
the vehicle.
(Easy Exit Positions): Press
to recall the easy exit positions.
The vehicle must be in P (Park).
If the easy exit feature is
programmed on in the vehicle
personalization menu, automatic
driver seat and power steering
column movement occur when
the ignition key is removed.
A single beep sounds. The driver
seat moves back approximately
8 cm (3 in) and the power steering
I n f o r ma t i o n P r o v i d e d b y :
Seats and Restraints
column, if available, moves up and
forward. To move the seat back
farther, press the easy exit seat
button again until the seat is all
the way back.
If something has blocked the driver
seat while recalling the exit position,
the recall may stop. Remove the
obstruction; then press and hold
the power seat control rearward for
two seconds. Try recalling the exit
position again. If the exit position is
still not recalling, see your dealer
for service.
See Easy Exit Seat under Vehicle
Personalization on page 5 41 for
more information.
3-7