Esc J - Samsung SRP-500 Programmer's Manual

[Notes]
[Default]
[Reference]

ESC J

n
[Name]
[Format]
[Range]
[Description]
[Notes]
2002. 1. 8.
* Printing is slower in double-strike mode.
Only the lowest bit of n is enabled.
▪
The printer does not double-strike for bit-images.
▪
Printer output is the same in double-strike and in emphasized
▪
(ESC E).
n = 0
ESC E
Print and feed paper
ASCII ESC J
Hex 1B 4A
Decimal 27 74
0 ≤ n ≤ 255
Prints the data in the print buffer and feeds the paper [ n ×0.122mm
{1/192 inches}] .
After printing is completed, this command sets the print starting
▪
position to the beginning of the line.
This command has no effect on the line feed amount set by the
▪
"ESC 2" command or the "ESC 3" command.
Programmer's Guide
n
n
n
C
OMMANDS
32