Qos Engine - D-Link DIR-865L User Manual

Section 3 - Configuration
The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the QoS Engine settings are
disabled and application priority is not classified automatically.
Enable QoS
This option is disabled by default. Enable this option for better
Engine:
performance and experience with online games and other
interactive applications, such as VoIP.
Automatic Uplink
This option is enabled by default when the QoS Engine option
Speed:
is enabled. This option will allow your router to automatically
determine the uplink speed of your Internet connection.
Measured Uplink
Speed:
This displays the detected uplink speed.
Manual Uplink The speed at which data can be transferred from the router to
Speed:
your ISP. This is determined by your ISP. ISP's often speed as a
download/upload pair. For example, 1.5Mbits/284Kbits. Using
this example, you would enter 284. Alternatively you can test
your uplink speed with a service such as speedtest.net.
QoS Engine Rules:
A QoS Engine Rule identifies a specific message flow and
assigns a priority to that flow. For most applications, automatic
classification will be adequate, and specific QoS Engine Rules
will not be required.
The QoS Engine supports overlaps between rules, where more
than one rule can match for a specific message flow. If more
than one rule is found to match the rule with the highest
priority will be used.
Name:
Create a name for the rule that is meaningful to you.
Priority:
The priority of the message flow is entered here -- 1 receives
the highest priority (most urgent) and 255 receives the lowest priority (least urgent).
D-Link DIR-865L User Manual

QoS Engine

72