Table of Contents
Advertisement
Then check that the setting 'Never dial a connection' is selected. Then on the LAN Settings screen nothing should be
ticked.
Click in 'Enter' to go to the configuration logon (or if you wait a few seconds this should happen automatically anyway).
(Don't worry that the example above shows the router address as 192.168.0.9 – this is the address we've used on our
network. If you left the addresses as default in the router then yours will show as 192.168.1.1).
Now enter the default user name and password.
Click OK and you should then go to the main configuration menu.
No other changes need to be made. If you're using
Netscape then no configuration is required for your
browser to automatically use your LAN.
Now enter the address of the router on the Address/URL
line of your browser. The browser should then load the
start-up page from the router:
- 9 -
Advertisement
Table of Contents
