Table of Contents
Advertisement
If you already see a line showing TCP/IP protocol such as
the example shown above then you can skip this section.
Otherwise click on Add, then select Protocol and then click
on Add.. again. Then on the Select Network Protocol
screen select Microsoft/TCP/IP...
Click on OK and Windows will then add the protocol to
your network set-up. You now need to check the settings of
the TCP/IP protocol to ensure they are compatible with the
router set-up. Details on how to do this are shown in the
next section.
Then on Properties..
If you already see a line showing TCP/IP protocol such as
the example shown above then you can skip this section.
Otherwise click on Install, then select Protocol and then
click on Add.
Then on the Select Network Protocol screen select
Microsoft/TCP/IP...
- 5 -
Advertisement
Table of Contents
