Fuel Lubrication And Exhaust System - Apache RTR 180 User Manual

Red in
colour
N9041400
Carburettor type
Main jet
Needle jet
Jet needle
E-ring position
Pilot jet
MCS screw
Idling RPM
Idling CO (with SAI)
Carburettor assembly
Ring jet needle
Jet needle
Piston valve
Mixture control screw (MCS)
Needle jet
Jet holder
Main jet
Pilot jet
Needle alve assembly
Float body assembly
Cover diaphram
Note : Part nos for remaining child parts of carburettor are same as Apache RTR 160 cc and refer Parts
catalogue ref. MCY4S10007
1. Muffler assembly is different from that Apache (RTR 160 cc) though the mountings are similar. The change is primarily
due to incr as d xhaust tube diameter to suit 180 cc engine assembly.
2. An air r s rvoir provid d in the SAI outlet pipe circuit for better emission performance. refer Exclusive part chapter
page No .... of this manual. For more details refer Apache service manual SER.MAN/APACHE 01 / Revision 0, August
2006 (Page o 3-11 to3-15)
NexGenBikes
The electrical system is same as that of Apache RTR 160 excepting the Dial colour change in Speedo meter and TCI Unit (due to change in ignition timing for 180 cc engine). For
more details on electrical system refer Apache service manual SER.MAN/APACHE 01 Revision 0, August 2006 (Page No 4- 1 to 4- 23 ) and RTR Service Information Manual
ref SER INF. MAN / APACHE RTR - Revision 1, March 2008 (Page No: 10 to 14)

4. FUEL LUBRICATION AND EXHAUST SYSTEM

FUEL TANK COMPLETE AND FUEL COCK ASSEMBLY
1. Except the fuel tank graphics, the mounting of fuel tank, fuel cock
assembly, fuel tank capacity and tank cover are same as that of
Apache RTR refresh 160 cc.
2. For more details on removal, cleaning and re-assembly procedure refer
Apache service Manual SER.MAN/APACHE 01 / Revision 0,
August 2006. (Page 3-1 and 3-2) and SER.INF.MAN / APACHE
RTR - Revision 1 (Page No 9)
CARBURETTOR ASSEMBLY
1. Carburettor removal and assembly procedure is same as Apache &
Apache RTR 160 cc. For more details on servi ing
refer Apache service manuals SER.MAN / APACHE 01 / Revision 0,
August 2006.(Page No3-1 to 3-10)
2. Carburettor assembly and child parts are different from Apa he
RTR 160 cc. Specifications and part nos of child parts are given below
3. Carburettor assembly can be identified by its part no
carburettor and by Red colour cover diaphragm.
Carburettor specifications
UCAL MICUNI BS 29
125
P-0
4DHL42
2 nd from TOP
20
3 ± 2
1400 ± 100 rpm
2 ~ 3%
Part Numbers of Exclusive Child parts of carburettor
N9041400
N9322960
N9322870
N9322880
N9322940
N9322890
N9322900
N9322910
N9322920
N9322950
N9322930
N9323320
EXHAUST SYSTEM
5. ELECTRICAL SYSTEM
f the arburett r
engraved on the
com
.