Table of Contents
Advertisement
System Settings
Scan Mode
The Scan Mode determines how the
system will act when scan is selected from
a scan compatible room station or patio
station.
Two Scan Modes are available:
• Scan Mode 1 uses radio station presets. It
allows the Room & Patio stations to scan
through the four music sources (AUX, AM,
FM, and CD). On AM and FM radio bands,
Scan Mode 1 scans through the preset
radio stations: AM 1-8 and FM 1-8.
• Scan Mode 2 stops at all strong radio
stations. Same selection of sources as Scan
Mode 1, but on AM and FM radio bands,
Scan Mode 2 scans all strong stations
before moving on to the next source.
Setting the Scan Mode:
1. To change the Scan Mode, simultaneously
press and release PRESET and SOURCE
buttons. The display shows either Scan1 or
Scan2.
2. Repeat Step 1 to select one Scan Mode or
the other.
✓ Note: Exit out of setting the scan mode
by pressing PRESET and SOURCE or wait
fi ve seconds for the display to show the
clock time again.
AUX
AUX
6
SCAN MODE 1
SOURCE SELECTION ORDER
AM STATION
PRESETS 1-8
SCAN MODE 2
SOURCE SELECTION ORDER
STRONG
AM STATIONS
Figure 7. Scan Modes 1 and 2
Music Auto On/Off
You can set the system to turn music on
automatically at the preset time and to turn
the music off automatically at the preset
time.
Automatically Turning Music
On and Off:
1. Set the Auto On/Off times as described
under Clock Settings.
2. Press the AUTO button to toggle between
On and Off. When the Auto function is on,
AUTO appears on the display.
FM STATION
PRESETS 1-8
STRONG
FM STATIONS
CD
CD
Advertisement
Table of Contents
